Guides, tips, and
pro-level technique
Pick a topic, hit play, and follow the steps. Each video is built to teach real technique you can use right away.
Interior Detailing
Clean, reset, and protect the cabin without residue.
Vacuum and blow out cracks, vents, seams, under seats.
Clean plastics, leather, vinyl, fabric — work in sections.
Wipe dry with clean microfiber, no streaks or residue.
Protect surfaces for UV resistance and longer lasting results.
Quick Exterior Detailing
Fast, safe steps for a clean finish and better shine.
Pre rinse top to bottom, remove loose grit first.
Wash in sections, keep mitt and media clean.
Rinse thoroughly, do not let soap dry on paint.
Dry properly, then add protection for easier maintenance.
RUPES How-To, Guides & Maintenance Tips
Inspect before — identify the real defect type and depth.
Check after each step, do not guess or assume.
Use proper angles, change positions to reveal haze and trails.
Lock it in once it looks right under light, then protect.
Spread slow first — even coverage, less sling.
Increase speed only when needed for correction.
Finish controlled — lower speed, lighter pressure.
Inspect often — quick checks save time and paint.
Assess defect depth, location, and paint condition first.
Start least aggressive — compound and polish test spot.
Sand only when necessary, then refine afterwards.
Re-inspect under light, confirm true correction.
RUPES Guide Videos
Prime evenly — light film across the whole pad face.
Use small drops after — a little goes a long way.
Clean often — brush or blow out spent polish regularly.
Swap pads as needed — cooler temps, better finish.
Start slow — pad flat, get control before adding speed.
Work small sections, overlap passes, steady arm speed.
Watch edges — avoid dwelling on body lines.
Inspect often — confirm progress before continuing.
Match the system — pad and compound to paint and defects.
Consistent passes, overlap and steady arm speed.
Wipe and inspect — confirm before moving on.
Refine and protect — finish down then seal.
GTECHNIQ Ceramic Guides
Ceramic protection done right — clean process, lasting results.
Prep first — remove contamination before any protection step.
Work clean — fresh towels, controlled environment, good light.
Apply evenly in small sections, level consistently.
Final inspect — confirm no high spots before cure time.
Set your pace — do not rush, consistent sections win.
Use the right towel rotation — avoid loading product back on paint.
Inspect angles — lighting changes reveal streaks fast.
Finish with a final check, then protect the cure window.